Paragon Laboratories
12649 Richfield Ct.
Livonia, MI 48150
734.462.3900 Phone
Paragon Laboratories B6 to B20 S500

B6 to B20 S500 | Biodiesel Blend (B6-B20) Testing According to ASTM D7467-18a

ASTM D7467-18a, Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20) defines and provides specifications for B6 to B20 S500 fuel blends.

B6 to B20 S500 fuel blends are low sulfur blends of biodiesel blend stock conforming to ASTM D6751 and light middle or middle distillate fuel diesel fuel with a maximum of 500 ppm sulfur allowed in the final blend.

Paragon is capable of performing a majority of the analysis related to the testing of B6 to B20 S500 fuel blends according to ASTM D7467-18a Table 1 specifications.

Procedures included on our A2LA Scope of Accreditation to ISO/IEC 17025:2005 are designated as such.

 

ASTM D7467-18a Table 1, Approved October 1, 2018

Service Method Reference Min. Sample Vol. Price ISO 17025
Total Acid Number (Potentiometric)* ASTM D664 50 mL $72.00 ---
Kinematic Viscosity, 40 °C ASTM D445 20 mL $49.00
Flash Point ASTM D93 150 mL $49.00
Cloud Point ASTM D2500 100 mL $55.00
Sulfur* ASTM D2622 40 mL $98.00 ---
Distillation ASTM D86 210 mL $78.00
Ramsbottom Carbon Residue (10% Bottoms) ASTM D524 210 mL $169.00
Cetane Number ASTM D613 1000 mL $264.00
One of the following shall be met:        
Cetane Index, 2 Variable (Calculated) (Requires ASTM D86 and ASTM D4052) ASTM D976-80 n/a $21.00
OR        
Aromaticity (Not Included in Cost Below) ASTM D1319-03 5 mL $105.00
Ash ASTM D482 150 mL $58.00
Water and Sediment ASTM D2709 100 mL $60.00
Copper Strip Corrosion ASTM D130 30 mL $46.00
Biodiesel Content (FAME)* ASTM D7371 30 mL $72.00 ---
Oxidation Stability EN 15751 50 mL $183.00
Lubricity by HFRR ASTM D6079 2 mL $287.00
Conductivity ASTM D2624 100 mL $65.00
Density ASTM D4052 5 mL $37.00
Total Cost   2247 mL $1663.00  

 

*Procedures we do not currently perform.