NO. 2-D S5000 DIESEL FUEL OIL CERTIFICATION ACCORDING TO ASTM D975
ASTM D975, Standard Specification for Diesel Fuel Oils, defines and provides specifications for No. 2-D S5000 fuel oil. No. 2-D S500 is a low sulfur middle distillate fuel used for general purpose diesel engine applications with varying speed and load with less than 5000 ppm sulfur allowed.
Procedures we don't currently perform are listed in red font. Procedures included on our A2LA Scope of Accredidation to ISO/IEC 17025:2005 are designated as such.
ASTM D975-11b Table 1, Approved December 1, 2011
Test |
Method Reference |
Min Sample Vol |
Price |
ISO 17025 |
| Flash Point | ASTM D93 | 75 mL | $47.00 |  |
| Water and Sediment | ASTM D2709 | 100 mL | $38.00 | |
| Distillation | ASTM D86 | 105 mL | $68.00 | |
| Kinematic Viscosity, 40 °C | ASTM D445 | 20 mL | $47.00 | |
| Ash | ASTM D482 | 150 mL | $50.00 | |
| Sulfur | ASTM D129[1] | --- | --- | --- |
| Copper Strip Corrosion | ASTM D130 | 30 mL | $44.00 | |
| Cetane Number | ASTM D613 | 1000 mL | $255.00 | |
| Operability Requirements: | ||||
| Cloud Point | ASTM D2500 | 100 mL | $47.00 | |
| OR | ||||
| Cold Filter Plug Point | ASTM D6371 | 100 mL | $47.00 |  |
| Ramsbottom Carbon Residue on 10% Bottoms | ASTM D524 | 125 mL | $177.00 | |
| Lubricity, HFRR | ASTM D6079 | 2 mL | $277.00 | |
| Conductivity | ASTM D2624 | 100 mL | $56.00 | |
Footnotes:
[1] ASTM D129 is listed in ASTM D975 as the referee method for sulfur analysis on S5000 grades. ASTM D5453 can be used as an alternative test procdure. Section 5.1.8 of ASTM D975 states that ASTM D5453 is appropriate for all grades of diesel fuel oil. Paragon currently offers analysis by ASTM D5453.