NO. 2-D S15 DIESEL FUEL OIL CERTIFICATION ACCORDING TO ASTM D975
ASTM D975, Standard Specification for Diesel Fuel Oils, defines and provides specifications for No. 2-D S15 fuel oil. No. 2-D S15 is ultra-low sulfur (ULSD) middle distillate fuel used for general purpose diesel engine applications with varying speed and load with less than 15 ppm sulfur allowed.
Procedures included on our A2LA Scope of Accredidation to ISO/IEC 17025:2005 are designated as such.
ASTM D975-11b Table 1, Approved December 1, 2011
Test |
Method Reference |
Min Sample Vol |
Price |
ISO 17025 |
| Flash Point | ASTM D93 | 75 mL | $47.00 |  |
| Water and Sediment | ASTM D2709 | 100 mL | $38.00 | |
| Distillation | ASTM D86 | 105 mL | $68.00 | |
| Kinematic Viscosity, 40 °C | ASTM D445 | 20 mL | $47.00 | |
| Ash | ASTM D482 | 150 mL | $50.00 | |
| Sulfur | ASTM D5453 | 10 mL | $77.00 | |
| Copper Strip Corrosion | ASTM D130 | 30 mL | $44.00 | |
| Cetane Number | ASTM D613 | 1000 mL | $255.00 | |
| One of the following must be met: | ||||
| Cetane Index | ASTM D976-80 | 110 mL | $14.00 | |
| Aromaticity | ASTM D1319 | 5 mL | $92.00 | |
| Operability Requirements: | ||||
| Cloud Point | ASTM D2500 | 100 mL | $47.00 | |
| OR | ||||
| Cold Filter Plug Point | ASTM D6371 | 100 mL | $47.00 |  |
| Ramsbottom Carbon Residue on 10% Bottoms | ASTM D524 | 125 mL | $177.00 | |
| Lubricity, HFRR | ASTM D6079 | 2 mL | $277.00 | |
| Conductivity | ASTM D2624 | 100 mL | $56.00 | |